PLUFIX

An heat chamber of exactly 7 meters long offers “single curing” for all kinds of inks and prints even at high speed production.
It is the perfect textile dryer for “High Volume Production”
PLUFIX 7.0 is a master of single-curing for heavy prints, thick and finished garments
Due to its “Double Blower”, it is perfect for water-based and discharge inks
The powerful blower ensures perfect curing and efficiency on printed garments
Thanks to the “Actual Curing Time” feature; instead of belt speed value, the real curing time in the heat chamber is displayed on the operator's control panel
The speed and direction of the belts can be adjusted independently
The portable operator control panel allows flexibility and ease of use
Using the “Temperature Calibration Page”, the dryer can be calibrated to show the actual garment temperature on the operator’s display
In the event of electrical failure, the independent power supply will continue to run the belt for an additional 3-4 minutes

PLUFIX 7.0 performs 6 separate safety checks each time it is started
The “Defect Seeking” system will display any fault on the operator’s panel and sound an alarm
Emergency stop safety buttons are located both on in-feed & out-feed conveyors and on the electric panel as well
Top quality control and gas equipment such as DUNGS, KROM SCHRODER, SIEMENS, SCHNEIDER, are used in PLUFIX
The PLC unit organizes and controls; Max-Min Gas Pressure, Blower Air Pressure, High Temperature, Ignition and Flame Control, Double Gas Filter and Double Solenoid, Gas Pressure and Volume Regulator as well as the control of all Motor Failures and Failure Resets
The FIBERFLON brand belts are heat resistant up to 250°C (482°F) and both sides are Kevlar® by DuPont™
Single belt and double belt models are available
Stainless steel entry & exit openings are adjustable
The temperature can be set up to 200°C (392°F)

PLUFIX 7.0 is operated by a single-touch button
All failures can be read in ENGLISH on the operator’s display
The PLC unit digitaly controls and displays the process temperature and set temperature
The “System Saver” feature means that, with a single touch it cools down and then shuts down automatically
With its “Easy Cleaning Cover” on the blower, there is no need to uninstall the blower for cleaning
Due to its practical design, the filters only take 10 minutes to clean
The fabric fibers and dust are burnt in the burner section, so the machine remains clean

Due to its stainless steel atmospheric burner, it offers great economy
High density rock-wool insulation and special design silicon gaskets reduce heat loss to a minimum
An accurate SCHNEIDER PLC control system reduces gas consumption and ensures precise temperature control