TEXTILE DRYERS

RAPICURE ELECTRIC DRYER  

RAPICURE ELECTRIC DRYER ELECTRIC DRYERS
RAPICURE Electric Heated Textile Dryer
  • RAPICURE has modular expandable design with additional heat chambers
  • Tailor-made non standard solutions to meet every demand
  • Many variations of belt width & heat chamber length
  • The powerful blower of RAPICURE ensures a perfect curing
  • Thanks to the “Actual Curing Time” feature; instead of belt speed value, the real curing time in the heat chamber is displayed on the operator’s control panel
  • The speed and direction of the belts can be adjusted independently
  • Using the “Temperature Calibration Page”, the dryer can be calibrated to show the actual garment temperature on the operator’s display
  • The “Defect Seeking” system will display any fault on the operator’s panel and sound an alarm
  • Emergency stop safety buttons are located both on in-feed & out-feed conveyors and on the electric panel as well
  • The FIBERFLON brand belts are heat resistant up to 250°C (482°F) and both sides are Kevlar® by DuPont™
  • Single-belt and double-belt models are available as well.
  • Stainless steel entry & exit openings are adjustable
  • RAPICURE is operated by a single-touch button
  • All failures can be read in ENGLISH on the operator’s display
  • The PLC unit digitally controls and displays the process temperature and set temperature
  • The “System Saver” feature means that, with a single touch it cools down and then shuts down automatically
  • Due to its practical design, the filters only take 10 minutes to clean
  • With its “Easy Cleaning Cover” on the blower, there is no need to uninstall the blower for cleaning
  • High density rock-wool insulation and special design silicon gaskets reduce heat loss to a minimum
  • The temperature can be set up to 200°C (392°F)
RAPICURE Forced Air Electric Dryer
  • Efficient stainless steel heaters are under a 5-year warranty
  • RAPICURE Hot air forced dryer is excellent for all kinds of inks (evaporative) and prints
  • Solid state temperature controls up to 200°C (392°F)
  • 40” IR heating zone with High Efficient Quartz Tubes at the entry side
  • Different temperatures can be set for two heat zones (forced hot air & IR Quartz Tubes) of RAPICURE
Options
  • Cooling system
  • IR Ceramic Heating Zone
  • Special assembly system fits through any door
  • Special design inlet and outlet
  • POWER SUPPLY for belts, so the belts will continue running 3-4 minutes in the event of energy failure